Stringers & Sides Stringers & Sides step 1.c, showing frames in position and the additional bow frame as discussed in the Nose Frame & Keel section. Stringers & Sides step 2.a, fitting cleats to frames. Stringers & Sides step 2.b. showing batten and shaped cleat. Stringers & Sides step 2.b showing batten lined up over outer edge of transom ply. Inner edge of batten will define line of cut of transom frame (see next image). Stringers & Sides step 2.b Stringers & Sides step 2.f, both sides clamped in place Stringers & Sides step 2.f, both sides clamped in place. Stringers & Sides step 2.i, defining the bottom edge of the sides Stringers & Sides step 2.l. Stringers & Sides step 2.m, sides glued in place and held by clamps while glue sets. Stringers & Sides, step 2.m. Stringers & Sides, showing modified plane to use in step 2.o Stringers & Sides step 2.o, bevelling the sides to align with the frames and stringers. Stringers & Sides step 2.o, showing the side bevelled to the line. Stringers & Sides, step 2.o, this time bevelling the keel. Stringers & Sides, giving an indication of what you can expect in the way of shavings. Stringers & Sides, showing sides and keel bevelled to align with frames and stringers. Stringers & Sides step 2.s, clearly showing the transom frame and the transom ply face ready to be applied. Stringers & Sides step 2.s, transom ply fitted and glued to the transom frame. Stringers & Sides step 2.s showing the transom fitted. This marks the end of the Stringers & Sides section. Share this:TwitterFacebookLike Loading...