Fitting Out the Mast The Mast – Construction, step 13 & step 14, 9 mm Pin fitted into the base of the mast and the base reinforced with whipping twine. The Mast – Rigging & Fittings, the hound fitting. The Mast – Rigging & Fittings, the hound fitting. The Mast – Rigging & Fittings, the diamond stays. The Mast – Rigging & Fittings, the diamond spreader fitting. The Mast – Rigging & Fittings, the diamond peak fitting. The Mast – Rigging & Fittings, the diamond foot fitting. The Mast – one example of an over-rotating mast setup, as mentioned at the end of Preliminary Considerations. The Mast – another example of an over-rotating mast setup, as mentioned at the end of Preliminary Considerations. Quick Release based on the Kilevic’s system, closed. [By Greg Barwick, Diamond Creek]Quick Release based on the Kilevic’s system, open, i.e. sail released [By Greg Barwick, Diamond Creek]For more on quick release options go to: https://wordpress.com/post/australiansailfish.wordpress.com/3521 This marks the end of the Mast section. Share this:TwitterFacebookLike Loading...